Iseki TX1510
Information, reviews, photos, discussion topics, owner pages, and specifications about the Iseki TX1510.
Under 25 HP Tractors
About the Iseki TX1510
-
Iseki TX1510 (Mitsubishi K3B) valve adjustment
For those of you looking ahead for information before starting this type of maintenance, every 400h, here's my experience; Access to the adjusters is really easy, although it helps to also unwind...- Ernie-32
- Thread
-
- Tags
- iseki tx1510
- Replies: 9
- Forum: Iseki
-
B
No Fuel Gauge Iseki Tx1510
My TX1510 like many others does not have a fuel gauge fitted as standard..has anyone done anything to solve this 'problem' I guess just continually checking the level is the obvious answer but...- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 6
- Forum: Iseki
-
J
Clutch change Iseki TX1510
Hello , I am about to change the complete clutch and release bearing on my Iseki. Can anybody tell me the torque settings for the bell house bolts and clutch bolts? Thanks Johnny P- Johnny P
- Thread
-
- Tags
- iseki tx1510
- Replies: 1
- Forum: Iseki
-
B
Iseki TX1510 Oil Pressure
Learned tractor owners I Have an Iseki TX1510. The Oil pressure light has started to come on very quickly when I throttle off completely (ie stop the engine) but also at very low revs. Someone...- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 16
- Forum: Iseki
-
P
Buying Advice Iseki TX2160 vs. Iseki TX1510
I'm new in the forum and before posting my question I'd like to say Hello to everybody. I live in Portugal and I've been exploring the Internet for a compact tractor with a loader. I found a...- Possie
- Thread
-
- Tags
- iseki tx1510 iseki tx2160
- Replies: 6
- Forum: Iseki
-
B
Oil & Fuel Iseki TX1510 Fuel Cap Washer
Hi folks anyone in the UK/Europe especially had to obtain a new filler cap washer and if so from where did you get it?- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 7
- Forum: Iseki
-
B
iseki TX1510 clutch replacement.
I have just completed a clutch replace job. Got parts on line from Jeffcube on ebay. Tractor split went well and back together somewhat okay. Question is front drive shaft will not go completely...- BendBound
- Thread
-
- Tags
- iseki tx1510
- Replies: 0
- Forum: Iseki
-
B
Iseki TX1510 3 Point Hitch very slow to rise
Drove down our field used the front end loader to do a little work; noticed the 3PH was right down so moved the lever to raise it - didn't move at all. Drove back to workshop by which time the 3PH...- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 4
- Forum: Hydraulics
-
B
Iseki TX1510 hydraulic suction filter/o ring replacement
Hi everyone anyone out there with an Iseki or Bolens ever replaced the Hydraulic suction filter and o rings? Is it straightforward and any tips would be greatly appreciated- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 12
- Forum: Iseki
-
B
Iseki TX1510 front wheel nuts
Anyone tell me what size the front nuts are please and where I can order from even in US if needs be- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 2
- Forum: Iseki
-
B
Iseki TX1510 Sticking Clutch
I have an Iseki TX1510. On a number of occasions over the past 12 months when it hasn't been used for a while the clutch won't disengage. Normally just by leaving it to warm up for a while this...- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 23
- Forum: Iseki
-
B
Iseki TX1510 ｣ Point Hitch Category
the operators manual says the 3PH is a JIS -0 (which I assume to mean Cat 0); the measurements suggest Cat 1 can someone confirm which is correct as I'm looking to buy EZ Hitch and obviously need...- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 8
- Forum: Iseki
-
B
Iseki TX1510 3 Point Hitch Lifting weight and Towing Weight
Can anybody tell me what the maximum lifting weight on the 3PH would be and also what the maximum towing weight would be assuming an A Frame with towball or drawbar with towball many thanks- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 0
- Forum: Owning/Operating
-
B
Iseki TX1510 Ballast Weights/measurements
I've been reading countless threads about ballast boxes etc. I have an Iseki TX1510 with a Bulldog 282 FEL. Normally I have a fairly heavy Rotavator on the back end which seems to work fine as a...- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 0
- Forum: Owning/Operating
-
B
Iseki TX1510 Rear Wheels
This will probably bring a wry smile to many faces perhaps but I have now had my Iseki for 6 months and looking at the rear wheeels again yesterday it suddenly made me wonder why the tyre valves...- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 8
- Forum: Iseki
-
B
Tires Iseki TX1510 Rear Wheels
This will probably bring a wry smile to many faces perhaps but I have now had my Iseki for 6 months and looking at the rear wheeels again yesterday it suddenly made me wonder why the tyre valves...- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 1
- Forum: Owning/Operating
-
B
Diff Lock Use Iseki TX1510 4WD
Can someone tell me very simply when Diff Lock should be used Thanks- ballaterach
- Thread
-
- Tags
- iseki tx1510
- Replies: 2
- Forum: Iseki
[ad placeholder]
User Reviews (2)
Read what TractorByNet members think about the Iseki TX1510 Subcompact Tractor
Grey Market Gem
Model Year: 0
Bought this tractor used from a private seller. He failed to disclose some issues with it, but that's to be expected. Brought it home and changed all the fluids. Found the front diff was full of metal and the wheel gears were dry. Also odd that it uses 80-90 for the trans and all hydraulics. Anyway, It's run great for me and I've put over 75 hours on it in 2 mo. Two issues... the PTO shaft fell out of the back. Found there was a missing snap ring, bought a new one and replaced and issue solved. Just yesterday I noticed it was pouring fluid on the ground, looked underneath, and the front diff cases had a gap between them letting all the fluid out. Looks like I may have overloaded the front end loader and snapped a couple of bolts. I blame that on trying to do more with the 'lil tractor than it was made to do. All in all, it's been great, and is a real trooper. I enjoy my time on it, despite it being too small for my size. Highly recommend it, as long as you're prepared to do the gray market parts search when you do have issues.
Pros: Does way more than a tractor of this size should be capable of.
Cons: It's possible to push it past its limits if you really try.
Model Year: 0
Bought this tractor used from a private seller. He failed to disclose some issues with it, but that's to be expected. Brought it home and changed all the fluids. Found the front diff was full of metal and the wheel gears were dry. Also odd that it uses 80-90 for the trans and all hydraulics. Anyway, It's run great for me and I've put over 75 hours on it in 2 mo. Two issues... the PTO shaft fell out of the back. Found there was a missing snap ring, bought a new one and replaced and issue solved. Just yesterday I noticed it was pouring fluid on the ground, looked underneath, and the front diff cases had a gap between them letting all the fluid out. Looks like I may have overloaded the front end loader and snapped a couple of bolts. I blame that on trying to do more with the 'lil tractor than it was made to do. All in all, it's been great, and is a real trooper. I enjoy my time on it, despite it being too small for my size. Highly recommend it, as long as you're prepared to do the gray market parts search when you do have issues.
Pros: Does way more than a tractor of this size should be capable of.
Cons: It's possible to push it past its limits if you really try.
[ad placeholder]
Iseki TX1510 Owner Pages
View owner pages to see photos, customization and comments about member-owner Iseki TX1510s