Massey Ferguson MF165 4.60 star(s) (19)

Very Good Older Tractor
Model Year: 1969

I needed a small to mid size tractor to mount a front end loader on to replenish dirt on a pond dam. I looked for several months and found the 8-speed 165 diesel that was in good condition. I also found a Massey Ferguson 32 industrial loader with a front mount pump that I installed on it. The tractor works well with the loader on ploughed loose clay and nothing has broken on either one yet.

Pros: Reliable, good value, good power, low fuel consumption
Cons: Needs more internal hydraulic pump capacity

Photo Uploads:

Good
Model Year: 1965

Okay.

Pros: None.
Cons: None.

MF 165 & MF 12
Model Year: 1973

MF 165, & MF 12 handle all my jobs very well.

Pros: Great tractor.
Cons: None.

Miss Will Start
Model Year: 1960

Three years after buying this tractor I had to buy a new battery. Eight years after buying it with unknown hours on it, I had to have the injection pump rebuilt (under $400.00) and the injection shop said the pump had never been rebuilt before in over 35 years! With temps under 0 degrees the Perkins engine will turn over less than 45 seconds and START with no starting fluid and no glow plugs. This can NOT be done with today's engines. This is the MOST reliable piece of equipment I have ever owned in 69 years.

Pros: Will always start.
Cons: Needs paint.

My Tractor "Old Red"
Model Year: 1965

Good machine. Still performs well. All systems go.

Pros: As above.
Cons: None.

Massey 165
Model Year: 1972

The tractor was my father's. I use it a few times a year to bushhog around the property. My next project on it is to reseal the power steering pump. It is leaking profusely to the point I can not run it very long. It has been a great tractor over the years.

Pros: Hardworking. No problems.
Cons: It's old.

Good
Model Year: 0

This is a good site for Information.

Pros: Good.
Cons: Big.

Massey Fergussen 165 Multipower
Model Year: 1973

When I bought this second hand tractor I had never driven a tractor before. I have since driven a John Deere with all the bells and whistles and there is no comparison really. Being that they were manufactured 40 years apart. It was well maintained and runs like a dream. Oodles of power and traction when required. I bought a heavy duty slasher with an 80hp gearbox and made a few dollars using that for many years. Took me a while to get used to the controls but now it's just easy. The only maintenance I have done is the oil & filter and fuel filters change, regular blowing the dust off and I serviced the whole water cooling system. Now even in our warm climate she stays as cool as a cucumber. I also like the auto hold on a hill. Much safer than without it. There is no cab so I have to pick good weather to work in.

Pros: Power, ease of use, economical.
Cons: No cab so no air conditioning.

165 Massey
Model Year: 1972

Great Tractor! This 1972 model MF replaced a 47 model 8N ford. My New used tractor. Love it---wish I had 2.

Pros: Easy running.
Cons: Hard to get on with a loader.

Photo Uploads:

1974 MF 165 Non-Multipower
Model Year: 1974

This tractor was purchased new by my son in law's grandfather. Finally ended up on dairy farm loading palm kernel and is in poor condition, but runs and drives okay except for hydraulics working very slowly. I intend to restore this tractor over the next few years and use it on my 5 acre lifestyle block.

Pros: Is plenty big enough for loader work.
Cons: Is an old tractor and needs plenty of TLC.

New Farmers, Old Tractor
Model Year: 1965

We needed a tractor with sufficient HP to run PTO implements. We bought our MF-165 used. It has done the job for us, but we aren't mechanics (yet), so maintenance has been stressful (seems breakdowns happen when the tractor is needed the most), but not unreasonable cost-wise. For being almost 50 years old, our MF-165 runs well, and could be made more reliable if we put the time and money needed into the effort.

Pros: Lots of power.
Cons: Few safety features and covered cab.

Old Banger
Model Year: 1986

Brought this old puppy about 9 years ago. Paid 40,000 sek for it and it is probably worth the same today. Use it to plough using a 2 bladed plough, drag trees out of the forest, scrub clearing, snow clearing and general duties around the farm. Needs a new radiator and has done for the past 3 years, just keep on filling it up , a couple of new rear tires wouldn't go amiss either. Out of commission at the moment due to bad fuel, so cleaning out the injection system but that's my fault not the tractors. Great vehicle to have around on our small holding it just keeps on plugging along, (well it will do when I get it back in running order). spares are easy to come by and its does not need rocket science to work on.

Pros: Everything, for its age its great.
Cons: Not four wheel drive.

Photo Uploads:

First Decent Over 50hp Tractor
Model Year: 1972

I've had this machine for nigh on half my life. It was used mostly as my chore tractor when I was farming. Good PTO horsepower-self adjustable rear wheels. The industrial loader is fantastic and very fast with the front pump. Easy to start in the winters (plugged in..) Absolutely no reason to part with it.

Pros: Well priced on the used market. Very good on fuel. Excellent weight distribution.
Cons: Watch out for the front end on loader equipped units. Brakes could be a little better.

MF 165 with 203 Motor
Model Year: 1967

Can find very little wrong with the tractor. Sometimes the extra gearing of multi-power would be handy, and power steering would be good, but they were optional when new. Since I bought it 13 Yrs ago, it has had a new clutch, a new tachometer, amp meter & fuel gauge. It has done some long days, and some hard work. Jobs include, haymaking with NH haybine, various rakes & IHC baler (the PTO is excellent, working at medium engine rpm for PTO speed it is economical , yet still good PTO power) slashing (even in thickest grass, you cannot stall the engine, and sensitive linkage enables me to even cut the front lawn with it) as well as various row crop cultivation, hilling up, weeding, etc. I think it would be hard to find a tractor built in 2012 to perform better.

Pros: Powerful for size; high torque; fuel efficient; reliable; easy to servie & use; parts quite cheap; very good linkage operation, particularly fine adjustments; easy starter.
Cons: Only 6 forward gears.

Can't Beat a MF
Model Year: 1972

For poor folk you just can't beat a MF with a Perkins diesel. Easy to work on and good work tractors. I avoid the power shift trannys as they can have trouble! The simpler the better!

Pros: Inexpensive.
Cons: Steering.

It's Never Let Me Down
Model Year: 1971

My 165 is my pride & joy. Not bad to look at & sounds great. Will do big makeover job at end of year. Very nice & easy tractor to mow with. Have some things to sort out & hope to get some tips from you all. Me I'm a sheep farmer in co Kerry Ireland. Got Cancer in 2010 but now I'm nearly fixed. Time for the 165. It's one of the things that I promised myself to do. Irishrm

Pros: I got one.
Cons: That I waited so long.

Hydraulics
Model Year: 1974

I am well pleased with my MF 165. It has great power and response with the one slight exception. The hydraulics are too low of volume. At 4.5 gpm they are a little slow but other than that it is an awesome tractor.

Pros: Perkins engine, and multi power.
Cons: Low gpm hydraulic remotes.

Old Massey-Ferguson Still Runs
Model Year: 1972

I bought an old Massey-Ferguson model 165, two wheel drive. TractorData rates the diesel at 52hp PTO, 41hp Drawbar, and apparently someone tested the drawbar power at 44.93hp. All I know is it doesn't seem to notice if I put a single plow in the ground, continues along at the same speed as before. When it's cold (below freezing) I have to give the air filter a small squirt of starter fluid to get it running. This is new enough to have modern features such as automatic 3-point hitch and roll bar with canopy. Mine came with a Bush Hog brand front end loader that is a lot stronger than I have seen on some smaller tractors. I bought some cat1 implements for it - a box blade, a 1-bottom potato plow (mould boards left and right from the point), and a sub-soiler. These mount to the cat2 hitch with metal sleeves from Tractor Supply. I need to get a 2-point or 3-point plow and a brush mower.

Pros: Lots of power and cat2 3-point hitch.
Cons: Old.The hydraulic system leaks so I have to refill it every couple of uses.

Photo Uploads:

Old Massey Ferguson - my first tractor
Model Year: 0

This is my first ever tractor so I don't know much to compare my experience with. I was looking at smaller tractors 20-30hp but the used John Deere was already sold so I bought this older bigger one for less. Rated 58hp and weighs 4 tons with front end loader, it gears down slow and even with 2 wheel drive it doesn't stop for small-medium cedar trees which is what I need it for most right now. I like it a lot! Some people with real-size farms of course have much bigger tractors than this one. It has a Category 2 three-point hitch. So far my implements are all Cat1, which is no problem with the adapter bushings I bought at Tractor Supply. Problems so far, not unexpected for a machine this old - gauges and lights mostly don't work, and the power steering failed when it ran out of fluid. The brakes work reluctantly. But it still starts and goes. I have a user manual and am just learning how to lubricate things; if anyone knows how to do front wheel bearings please let me know as the grease fittings in the manual don't exist. My place is extremely rocky, hardly any dirt in the wooded area. Some cedar trees that are rooted between rocks pop up again after I knock them down. I bought a big Paumco shovel that attaches to the front loader and a Brush Grubber Extreme, both from Northern Tool. I haven't had time yet to attach the shovel right. It should be able to dig out some tree roots and rocks that the 6' bucket alone cannot, but on my first test it just went crooked because I didn't have a chain tensioner. This really needs a 3/8 chain and a ratchet tensioner before you can use it. I also need to attach a mirror somewhere so I can see it in front of the bucket. The Brush Grubber Extreme worked great on 2 trees so far that the bucket couldn't remove, maybe 1 and 2.5 inches diameter, way less than its capacity. I am happy that I didn't buy a small one as the big one works great with small trees too. I have some good bottom land along the river and plan to plant assorted vegetables there after clearing enough trees to get there in the tractor. The manual says I can use up to 4-bottom plows, I will buy whatever I can get used cheap. I might also buy a manual push-type seeder. Does anyone have anything I especially need to know for first crop? - Benjamin

Pros: More power/weight than compact models.
Cons: Old, lots of small things don't work.

Photo Uploads: